DATA SHEET
View/download data sheet.
SDS
View/download safety data sheet
AEROFLEX EPDMTM
SINGLE SOURCE SOLUTIONS!
AEROFLEX® offers single-source hermetic system accessories, including EPDM fitting covers, insulated pipe supports, specialty contact adhesives, tapes, and coatings, and are covered by an express limited warranty.
LEARN MOREAEROFLEX®-EP Pipe Insulation FM Approved
Description
AEROFLEX®-EP Pipe Insulation is an AEROFLEX EPDM™ formulation that is third-party certified by FM Approvals to meet Class of Work, Standard FM 4924 Pipe and Duct Insulation.
Thicknesses: ½” [13 mm], 1” [25 mm], 1-½” [38 mm], 2” [50 mm].
ID’s: ¼” [6 mm] to 6” IPS [152 mm].
Also available in Sheets & Rolls.
Specification Compliance
- ASHRAE Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings
- ASHRAE Standard 189.1, International Green Construction Code®
- ASTM C534 Type I
- Buy American
- California Title 24, Building Energy Efficiency Standards
- EPA
- IECC®, International Energy Conservation Code®
- REACH
- RoHS
Key Benefits
• Third-party tested for fire safety
• Prevents heat gain/loss
• Controls condensation
• Fiber-free
Applications
• HVAC piping
• Refrigerant piping
• Chilled water piping
• Domestic hot & cold water piping
• Low-pressure steam
Performance Properties
• Thermal Conductivity: 0.266 (75ºF, ASTM C177/C518)
• Continuous Service Temperature Range: Standard: -297°F to 257°F (-196°C to 125°C) (ASTM C411)
• Fire Rating: FM Approved (FM 4924), UL 94 V-0
• Water Vapor Permeability: 0.10 perm-inch (ASTM E96)
• Water Absorption: 0.2% (ASTM C209/C1763)
